|
Iscar Offers A Revolutionary Family Of Slitting Cutters Using Tang-Grip Technology And The Sturdiness Of Sumo Tec Grades
Iscar currently offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added strength of the revolutionary Sumo Tec insert grades.
The notion, already verified successful in Tang-Grip parting tools, has now been spread to slitting cutters. In the patented Tang-Grip clamping system, inserts are press-fit into their pockets accompanying a specialized hand tool, and are held securely in place without the need without requiring clamps, upper jaws or set screws that can weaken the insert and obstruct chip flow. The pocket composition uses cutting forces to retain the insert seated tightly in position, removing any risk of insert pull-out. The Tang-Grip clamping system also fosters more accurate slitting cuts plus lengthened pocket and insert lifespan.
Iscar's Sumo Tec insert grades showcase a unique post-coating treatment which substantially increases tool life and constancy.
Launched in late '07, the new Sumo Tec treatment flattens the insert's coated surface to banish microscopic stress raisers, diminish heat and friction and increase chip flow. The result is improved toughness and opposition to chipping and built-up edge, all leading to enhanced tool life. The golden-colored flank on Sumo Tec inserts facilitates wear detection. Size for size, Tangslit cutters give more teeth than Iscar's SGSF cutters, providing higher feed rates.
Their increased rigidity leads to straighter, additional accurate cuts and less vibration even in large-diameter cutters. The revolutionary Tangslit TGSF cutters come in 100 to 160 mm diameters, 3 and 4 mm widths and can accept the exact same variety of inserts as Tang-Grip parting tools. Additional sizes will be added.
Available Sumo Tec grades for Tangslit cutters include:
IC808, with a tough submicron substrate below a Sumo Tec TiAlN PVD coating, giving exceptional resistance to impact loads and built-up edge. This grade is suggested for slitting heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel.
IC830, supplying increased toughness for heavier parting and grooving involving interrupted cuts. It is suitable for every stainless steel & high temperature alloys.
IC908, a hard, fine-grain substrate with outstanding chipping resistance, mixed with a new Sumo Tec TiAlN PVD coating. It is perfect for nodular or grey cast iron.
IC928 and 928A, PVD TiAlN-coated tough grades fitting for stainless steel, high temperature alloys and other alloy steels. These grades are also recommended for interrupted cuts and heavy operations.
Every Tangslit and Tang-Grip inserts are found in J- or C-type chipformer geometries from Iscar.
Various Advancements Have Enhanced Iscar's Families Of Indexable Endmills For Expanded Productivity
Helido-Upfeed 04 Two years ago Iscar introduced the extremely efficient H600 indexable endmill line, based on conceptually new Helido-Upfeed double sided inserts with 6 cutting edges. The first insert launched was the H600 WXCU 0806..., which was designed for milling cutters in the diameter range of 50 to 125 mm.
Iscar Recently Releases Numerous Brand New Lines To Enlarge Their Family Of Milling Cutters
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.
The Most Recent In Carbide Endmill Configuration In A Lengthy And Prospering Family From Iscar
Manufacturers and die & mold shops can eliminate chatter problems in many milling operations with Iscar's new Chatterfree endmills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the main source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.
New Tools And Carbide Insert Configurations From Iscar To Better The Machining Procedure
Iscar is introducing Penta 34 carbide inserts with a new PB chipformer. The PB chipformer features a single cavity with a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer with a different frontal edge.
Push Pull Testing For Railway Industry Supplying Calibrated Measuring Instruments. Stress Load Testing Methods For On Site Proof To Testing Demands.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.
Commercial Water Heater- Which Is Best For Your Necessities
If you are in the market for a commercial water heater then consider what the needed application is and your overall cost to determine which is best for you. Since there are so many to choose from you may have to do some calculating in order to match the need.
Seek Out Automotive Manufacturing Jobs.
There is no point in denying that workers serving in the automotive industry are also suffering from the economic recession that everybody is experiencing world wide.
New Car Manufacturing Jobs To Save The Economic System
The global recession the economy is experiencing in the past few years have pushed major companies to close down and stop their operations.
New Land Rover Manufacturing Jobs
Britain's economy is trying to recover from the impact caused by the global economic recession through new Land Rover manufacturing jobs.
|
